High Pressure Cleaning Nozzle Type 67 (Al 2 O 3 ) - 2500 bar
Al 2 O 3 ceramic features excellent characteristics. Because of those characteristics this nozzles offer a longer life time and cause less changeover time:
High pressure cleaning nozzles / surface finishing
By using special high pressure pump the water will be high compressed. So a water pressure can become up to 2500 bar. Just to add the nessessary kinetic energy into the high pressure water, it has to be pressed through a superfine nozzle.
The target intensity and effect of the water jet can be determined by the pressure and the nozzle selction.
Water cut technology is very suitable to fast, exact and environmentally machining of urfaces and removal of layers.
Even sensitive urfaces can be prepared smooth by this technique.
The surfaces can be cleaned efficient and residue-free and therefore they are excellent prepared to further processes.
There are many applications in the field of surface jetting: Cleaning of buildings and frontages, ships, container, streets, landing runways, tubes, drains, gullies and flash removal, remove of concrete and bitumen up to eliminate hard and soft materials and layers. Because of the water jet’s high power impact, there is no need to use chemical products. So it can be guaranteed an environmentally process. In case of extreme requirements, the compatibility of environment can be increased by intermixture of abrasive media.
Bestell-Nr.
ordering code |
Durchmesser T
mm |
Diameter T
inch |
RDT-67040* |
0.40 |
0.016 |
RDT-67050* |
0.50 |
0.020 |
RDT-67060* |
0.60 |
0.024 |
RDT-67070* |
0.70 |
0.028 |
RDT-67080* |
0.80 |
0.031 |
RDT-67090* |
0.90 |
0.035 |
RDT-67100* |
1.00 |
0.039 |
RDT-67110* |
1.10 |
0.043 |
RDT-67120* |
1.20 |
0.047 |
RDT-67130* |
1.30 |
0.051 |
RDT-67140* |
1.40 |
0.055 |
RDT-67150* |
1.50 |
0.059 |
RDT-67160* |
1.60 |
0.063 |
RDT-67170* |
1.70 |
0.067 |
RDT-67180* |
1.80 |
0.071 |
RDT-67190* |
1.90 |
0.075 |
RDT-67200* |
2.00 |
0.079 |
RDT-67210* |
2.10 |
0.083 |
RDT-67220* |
2.20 |
0.087 |
RDT-67230* |
2.30 |
0.091 |
RDT-67240* |
2.40 |
0.094 |
RDT-67250* |
2.50 |
0.098 |
RDT-67260* |
2.60 |
0.102 |
RDT-67270* |
2.70 |
0.106 |
RDT-67280* |
2.80 |
0.110 |
RDT-67290* |
2.90 |
0.114 |
RDT-67300* |
3.00 |
0.118 |
* on request
The nozzle is made of stainless steel and a ceramic insert. Upon request, it is also available with other hole diameters.
More info